Angle Tilt Sensor/Inclinometer with Remote Display Pendulum Type

1 - Angle Tilt Sensor/Inclinometer with Remote Display - Pendulum type.

2 - Tilt/incline angle sensor with a remote LCD display with a resolution of 0.1 degrees.

3 - As the angle sensor is rotated a weighted internal pendulum, provides a reference and remote display calculates the angle.

4 - The remote display has the on/off button and a zero function button allowing the display to be set to zero degrees in any position.

5 - The gauge is powered by a standard CR2032 battery located behind a twist lock compartment on the rear of the display.

6 - The Display is linked to the angle sensor by a 910mm (36") cable with an in-line socket and plug.

7 - This allows the display and angle sensor to be disconnected. The angle sensor has a mounting flange with two mounting holes.

8 - We would recommend that 5 meters is the maximum cable length when using the Angle Tilt Sensor/Inclinometer.

9 - Please Note - The sensor must not be subjected to harsh vibration. Protect sensor from coolant and moisture ingress.

10 - Applications Include - Dividing heads, Angle table, Telescopes, Tilting angle plates, Milling machine head angle, table saws etc..

11 - Included with the gauge - Remote LCD display, Angle sensor and Battery.

12 - Range: 0-360 degrees.

13 - Accuracy - +/- 0.1 degrees.